Skip to product information
1 of 1

APR High Pressure Fuel Pump - 2.5 TFSI (Rebuild) - MS100062

APR High Pressure Fuel Pump - 2.5 TFSI (Rebuild) - MS100062

SKU: MS100062
Regular price $1,537.95 USD
Regular price Sale price $1,537.95 USD
Sale Sold out

Overview:

The APR High Pressure Fuel Pump (HPFP) dramatically increases the maximum volume of fuel the HPFP can deliver. In doing so, the direct injection fueling system is capable of satisfying fueling requirements set forth by high horsepower setups. This is accomplished by increasing the displacement of the pump using high quality components to exacting tolerances. How the direct injection system works: A low pressure fuel pump (LPFP) in the fuel tank delivers fuel to the high pressure fuel pump (HPFP) at roughly 4 to 6 bar. Fuel pressure is then bumped up to a maximum of 145 bar, depending on factory parts, with the HPFP. Finally, high pressure fuel is delivered to the injectors, which spray directly into the cylinders. The problem: The volume of fuel the HPFP pump can displace is directly tied to the displacement of the pump (Internal bore size, and camshaft dictated stroke), and engine speed. The pump is driven off of a camshaft. Even the factory turbocharger is capable of taxing this system, especially in the mid to lower RPM range where fuel volume is lower. The APR solution: We dramatically increase the volume of fuel the HPFP can displace at every RPM by increasing the displacement of the HPFP. This is accomplished by increasing the bore diameter of the pump's internal pressurizing cylinder. It's important to understand, despite the name, a HPFP upgrade is not necessary designed to increase the engine's fuel rail pressure. The primary goal is to increase the volume of fuel available, which will keep fuel pressure steady even in the most demanding of situations! High quality components and extreme tolerances: The HPFP internals must be machined to extreme tolerances and installed in a clean environment or the pump can easily fail. Dimensional tolerances on the APR HPFP are as tight as .00004" and geometric tolerances are as tight as .00005". The plunger and barrel are created from certified and heat-treated bearing-grade stainless steel and the plunger undergoes a special diamond like coating process for exceptional surfaces hardness and ultra-reliable operation. To prevent float associated with altering the plunger's mass, APR supplies each unit with a properly specified spring. All necessary internal seals are replaced. Internal testing: All APR HPFPs are assembled in house under strict assembly guidelines. Each pump is then tested on our test rig to ensure the pumps operate as designed. This step is important for several reasons. It's critical in determining if a pump has a failure from incorrect install, a leaking seal, or a bad solenoid. Secondly, a seized pump on the vehicle at startup can cause damage to the engine's camshaft. By testing each pump, we all but eliminate these possibility. Proven track record: APR pioneered HPFP upgrades in the early days of VAG direct injection engines. Soon after, APR became an OEM supplier of HPFP and GDI components to VAG for use in various race cars, racing series, project cars, and concept vehicles. The APR HPFP has been at the center of countless motorsport victories across the globe and has operated with a nearly perfect tract record since the program's motorsport backed inception in 2006. With tens of thousands of pumps sold, APR has a wealth of knowledge, and manufacturing expertise necessary to deliver a product that will and has stood the test of time. This is a rebuild of your factory HPFP. Working pumps must be sent to APR. Pump rebuilds are applicable to the Hitachi Gen III pump found on the 1.4T, 1.8T/2.0T EA888 Gen 1/2, 2.5 TFSI (Gen 1), 3.0T Supercharged, 4.0T V8 (C7/D4), 5.0T V10, and 5.2L FSI V10.

Features:

  • Dramatically increases the volume of fuel displaced by the HPFP
  • Maintains higher pressures under demanding situations
  • Fully rebuilt in house
  • Fully machine tested and broken in before shipping
  • Rebuilds your factory pump
  • Upgraded and weight matched spring
  • DLC coated piston
  • Heat-treated bearing-grade stainless steel material
  • Supports big power
  • .00004" dimensional tolerances
  • .00005" geometrical tolerances
  • Seals replaced

Year Make Model Submodel Engine Size
Universal

Brand APR
Emission Code 4
Larger Bore Yes
Larger Piston Yes
New or Rebuilt Pump Rebuild
New Seals Yes
New Spring Yes
Piston / Bore Material Bearing-Grade Stainless Steel
Piston Coating DLC
Product Type High Pressure Fuel Pump
Quantity 1
Rebuild Yes
Tested Yes
Warning California Proposition 65
View full details

Policies and FAQs

Return Policy

We accept returns on products within 30 days of delivery. Return shipping is the responsibility of the buyer unless we, the seller, are at fault.

Fault reasons include but are not limited to:
  • Buyer was shipped the wrong product
  • Buyer was shipped a damaged product
  • The product page had incorrect fitment and the part does not fit the Buyer's vehicle
 
The Buyer will not be refunded outbound shipping unless the Seller (Modern Day Muffler & Brake) is at fault.
 
In cases where the Buyer purchases and ships the return please note that if the Shipper (ex. USPS, FedEx, UPS, etc.) loses the return we will not be able to offer a refund as the Buyer must contact the Shipper and make a claim.
 
All products must be returned in original condition, meaning that the product must not be damaged, installed, or missing pieces/parts. If the product is not in original condition a deduction will be issued of up to 100% of the purchase price of the product.
 
Opened boxes, plastic bags, and other packaging are not considered damage (excluding single use items such as, but not limited to, liquids, software, and other components that cannot be reused/resealed).
 
When we, the seller, are at fault, please Contact Us for a return label, products returned with a shipping label not provided by the seller will not be refunded to the buyer. Please also note that our return labels are issued with the dimensions and weight of the original shipment, if the product is being returned in any box/package besides the original please Contact Us with the dimensions and weight.

Returns must be sent to this address:
Modern Day Muffler & Brake
774 Broad Street
Wadsworth, OH 44281
 
Products returned directly to a manufacturer or the incorrect address may be issued a deduction or denied a refund entirely.
 
If a product was delivered outside the 30 day return window or is no longer in original condition please contact us as we may be able to issue a refund in store credit and/or with a deduction. If this is the case please Contact Us as these situations are handled on a case by case basis.
 
If there are any questions, concerns, or doubts about return eligibility please Contact Us and we would be more than happy to assist you.

This page and policy were last updated: July 14th 2023

FAQs

This is the line that runs from the front of the vehicle to the rear. On most vehicles it connects to a junction then you will have rear axle lines. On a few cars the intermediate lines will connect to the rear wheels. It is recommended to change the axle lines if you are replacing the intermediate lines.

Our kits include all of the solid metal lines for that section of the vehicle.

We are happy to help! Please help us to help you by going to our return form and filling out the form as best as you can in order to request a return.

  • Modern Day stands by our parts and is happy to accept returns within 30 days of purchase. Parts must be in new condition.
  • If a part arrives damaged, or is defective, Please report it to us immediately. So we can handle it for your promptly.

Yes but you will need to order in advance. All of our items are not stocked at our location. So please place your order online and we will notify you when it is ready for pick up.

Unfortunately we cannot offer single lines outside of kits

Yes, all are covered by the manufacturer's standard warranty. Most warranties cover the cost of parts. Any installation or other fees are non-refundable.

Online we accept PayPal and all major Credit Cards. If your are picking an item up we gladly accept cash.

We can only ship to your confirmed address in PayPal or your billing address if you pay with a credit card.

Orders typically Arrive within 3 to 10 days depending if it is a stocked item or something we have manufactured at time of sale.

Yes please send us a message through our custom orders page.

Yes, but items sent out of the continental U.S. may incur additional charges based on their destination

The left and right sides on a vehicle are determined as though you were sitting in the driver's seat. The left is the driver's side, and the right is the passenger's side.

Check it again tomorrow. It takes up to 1 day for the carrier to give status and a delivery date. UPS and FedEx provide delivery dates, USPS usually does not but they take no longer than 5 business days.

Yes! Thank you for your military service!

Still have a question or concern?  Please contact use our contact us form!

Yes! Thank you for your military service!

Warranty Information

Customer service is our top priority and because we value your time and energy we ask you to visit our Contact Us page and reach out so that we may assist you in finding the correct warranty for your product. Please include your name, the name on the order, the order number, and the SKU of the product to ensure the quickest and most accurate response to your inquiry.

Product Notices

*NOTE: Product images may not reflect actual product appeareance.