1 8

base-kit-without-pdm-3-5-in-handheld-base-kit-sniper-2-efi-shiny-550-510-3xx

base-kit-without-pdm-3-5-in-handheld-base-kit-sniper-2-efi-shiny-550-510-3xx

SKU: 550-510-3XX
$1,299.95 USD
$1,299.95 USD
Sale Sold out

The #1 EFI conversion system just got better! Introducing Sniper 2 EFI - a self-tuning, easy-to-install, EFI conversion for common 4-barrel (4150 flange) style carburetors. We took everything that we learned from the original Sniper EFI system and added 14 new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper Ecosystem that includes Hyperspark ignition, complete fuel systems, multiple user interfaces/dash displays, and more. New for Sniper 2 is the optional Power Distribution Module (PDM). This cost-effective and optional accessory isolates the core of your EFI and ignition wiring into one, easy-to-use location. Simply slide the stripped wire ends under the positive lock connector and tighten down the set screw. Battery and a switched 12-volt source is all that's required from your vehicle to power the PDM and your Sniper EFI. Make your classic drive like a modern fuel-injected vehicle, including easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine and the system will begin self-tuning with no laptop or tuning experience required. If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI.
  • Main Features
  • All new design – the #1 EFI Conversion just got better!
  • Only four wiring connections required: Battery+, Battery-, Switched Ignition, and RPM
  • Calibration wizard only requires that you answer a few simple questions about your engine to create a base map and begin self-tuning – No laptop required
  • Supports up to 650hp naturally aspirated or 575hp on boost with four 100 lb/hr injectors
  • (NEW) Next generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires)
  • (NEW) Redesigned throttle shaft and plate geometry for a smoother throttle feel
  • Sniper 2 is Part of the Sniper EFI Complete Ecosystem
  • Sniper 2 is compatible with the complete Sniper EFI Ecosystem that includes plug-n-play Hyperspark Ignition systems (coil, ignition box and distributor), fuel systems (fuel lines, fuel pump hangers), multiple displays and more
  • (NEW) Main harness includes plug-and-play HyperSpark distributor support, for integrated timing control, making your ignition setup hassle free
  • (NEW) Adaptors for other ignition types sold separately: 558-329 CD Box to Sniper 2, 558-330 MSD Pro Billet / Crank Trigger to Sniper 2
  • (NEW) Wide Variety of tuning and gauge display interfaces: from a 3.5-inch full color LCD Handheld, 5-inch Digital Dash, or the Bluetooth dongle, which allows you to connect either an iOS or Android based cell phone to your Sniper 2
  • (NEW) Optional Power Distribution Module (PDM) further simplifies wiring, especially when used in conjunction with an ignition system
  • Available with fuel system kits: a complete fuel system consisting of: 20 ft. of 3/8 in. Vapor Guard Fuel Hose, Fuel Pump, fuel pressure regulator, filters, necessary hardware, and bulkhead fitting to return fuel into the tank
  • Additional Features
  • (NEW) Integrated transmission kick down provisions for GM TH350/400, 200-4R/700R4 and Ford C4/C6 applications
  • (NEW) “Hidden Harness” wiring harnesses exits from the rear of throttle body for a clean appearance
  • (NEW) Inputs and outputs consist of: 2x Ground Inputs, 2x Ground Outputs, 1x TPS output (0-5v), and 1x Tach Output
  • (NEW) Redesigned injector connector for improved reliability
  • (NEW) Onboard contactless magnetic TPS sensor ensures an accurate TPS reading
  • (NEW) Next Generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection
  • (NEW) Cast-in fuel crossover from the primary to secondary fuel rail
  • (NEW) Sniper 2 throttle bodies are serialized in house, which provides each unit a birth certificate for an improved customer service and warranty experience in the event of any unit needing to be inspected
  • The included genuine Bosch LSU 4.9 wideband oxygen Sensor provides real-time fuel map learning
  • Included clamp-on oxygen sensor kit ensures a leak free oxygen sensor installation with stainless steel T-Bolt clamps and a stainless steel weldable oxygen sensor flange
  • Patent Pending
View full details

Policies and FAQs

Return Policy

We accept returns on products within 30 days of delivery. Return shipping is the responsibility of the buyer unless we, the seller, are at fault.

Fault reasons include but are not limited to:
  • Buyer was shipped the wrong product
  • Buyer was shipped a damaged product
  • The product page had incorrect fitment and the part does not fit the Buyer's vehicle
 
The Buyer will not be refunded outbound shipping unless the Seller (Modern Day Muffler & Brake) is at fault.
 
In cases where the Buyer purchases and ships the return please note that if the Shipper (ex. USPS, FedEx, UPS, etc.) loses the return we will not be able to offer a refund as the Buyer must contact the Shipper and make a claim.
 
All products must be returned in original condition, meaning that the product must not be damaged, installed, or missing pieces/parts. If the product is not in original condition a deduction will be issued of up to 50% of the purchase price of the product.
 
Opened boxes, plastic bags, and other packaging are not considered damage (excluding single use items such as, but not limited to, liquids, software, and other components that cannot be reused/resealed).
 
When we, the seller, are at fault, please Contact Us for a return label, products returned with a shipping label not provided by the seller will not be refunded to the buyer. Please also note that our return labels are issued with the dimensions and weight of the original shipment, if the product is being returned in any box/package besides the original please Contact Us with the dimensions and weight.

Returns must be sent to this address:
Modern Day Muffler & Brake
774 Broad Street
Wadsworth, OH 44281
 
Products returned directly to a manufacturer or the incorrect address may be issued a deduction or denied a refund entirely.
 
If a product was delivered outside the 30 day return window or is no longer in original condition please contact us as we may be able to issue a refund in store credit and/or with a deduction. If this is the case please Contact Us as these situations are handled on a case by case basis.
 
If there are any questions, concerns, or doubts about return eligibility please Contact Us and we would be more than happy to assist you.

This page and policy were last updated: July 14th 2023

FAQs

This is the line that runs from the front of the vehicle to the rear. On most vehicles it connects to a junction then you will have rear axle lines. On a few cars the intermediate lines will connect to the rear wheels. It is recommended to change the axle lines if you are replacing the intermediate lines.

Our kits include all of the solid metal lines for that section of the vehicle.

We are happy to help! Please help us to help you by going to our return form and filling out the form as best as you can in order to request a return.

  • Modern Day stands by our parts and is happy to accept returns within 30 days of purchase. Parts must be in new condition.
  • If a part arrives damaged, or is defective, Please report it to us immediately. So we can handle it for your promptly.

Yes but you will need to order in advance. All of our items are not stocked at our location. So please place your order online and we will notify you when it is ready for pick up.

Unfortunately we cannot offer single lines outside of kits

Yes, all are covered by the manufacturer's standard warranty. Most warranties cover the cost of parts. Any installation or other fees are non-refundable.

Online we accept PayPal and all major Credit Cards. If your are picking an item up we gladly accept cash.

We can only ship to your confirmed address in PayPal or your billing address if you pay with a credit card.

Orders typically Arrive within 3 to 10 days depending if it is a stocked item or something we have manufactured at time of sale.

Yes please send us a message through our custom orders page.

Yes, but items sent out of the continental U.S. may incur additional charges based on their destination

The left and right sides on a vehicle are determined as though you were sitting in the driver's seat. The left is the driver's side, and the right is the passenger's side.

Check it again tomorrow. It takes up to 1 day for the carrier to give status and a delivery date. UPS and FedEx provide delivery dates, USPS usually does not but they take no longer than 5 business days.

Yes! Thank you for your military service!

Still have a question or concern?  Please contact use our contact us form!

Yes! Thank you for your military service!

Warranty Information

Customer service is our top priority and because we value your time and energy we ask you to visit our Contact Us page and reach out so that we may assist you in finding the correct warranty for your product. Please include your name, the name on the order, the order number, and the SKU of the product to ensure the quickest and most accurate response to your inquiry.

Product Notices

*NOTE: Product images may not reflect actual product appeareance.

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)